In this article, we show you the step by step guide on how to set up and install a Commercial Max roof rack for the Volkswagen Caddy.

The Commercial-Max roof rack is Tradesman’s heavy duty roof rack for carrying building materials, plaster sheets, ladders and all your work and leisure materials.

The racks are built using heavy duty ERW commercial grade tubing and powder coat finished in black.

Each rack features individually designed mounting systems and platforms to suit specific vehicle makes and models, to ensure reduced wind noise, maximum load rating and the best fit to your vehicle.

This video is brought to you by our team at Tradesman Roof Racks Bayswater.
Today our team is fitting an Commercial Max Open-Ends Roof Rack for a Volkswagen Caddy.

 

1. Undo the Factory bolts with a hex key. Then silicone the bolt holes.

2. Using bolts and washers, bolt the rails to the roof.

3. Tighten the bolts with a socket or spanner.

4. Bolt unistrut nuts to the rails by hand, so they are still loose. Have the “teeth” side face down.

5. Front-most Position: Tailgate doors with rollers.
Middle Position: Rollers or Tailgate door.
Rear Position: No rollers and barn door.

6. Repeat steps for the other rail.

7. Lower the rack onto the roof so the unistrut nuts slot into the channels in the bars of the rack.

8. Center the rack on the roof.

9. Tighten the unistrut nuts by hand.

10. Finish tightening the unistrut nuts with a spanner.

11. Using bolts and nuts, bolt the wind deflector to the front of the roof rack.

12. Tighten the bolts with a socket or spanner.

Your Volkswagen Caddy roof rack is ready for use!